Coils & Plug Wires
MINI-V.I.P.- (Voltage Intensive Power)
Hot New 18 volt MINI-V.I.P.(Voltage Intensive Power) is now available for ’01-’06 PT Cruisers. The Mini-V.I.P. steps up the charging system’s 14 volts to 18 volts which is sent specifically to your ignition system in order to provide your PT Cruiser with the ultimate spark combustion. In a series of 0-60 mph test runs, we reduced our ET an average of .21 seconds, and on our best run, we reduced our 0-60 ET .27 seconds! The test was conducted on a ’05 Turbo PT.
The 18 volt Mini-V.I.P. is truly a revolutionary product that leads to “Chargition.” “Chargition” is what Performance Distributors defines as the science that bridges the gap between your charging system and your ignition system. It emphasizes how a maximum performing charging system leads to a maximum performing ignition system.
The 18 volts which the Mini-V.I.P. produces, enables you to open up your plug gaps to a whopping .070”, burning your fuel more completely on each piston stroke. This in turn, leads to superior throttle response. Voltage drop, which occurs when you have your accessories running, is eliminated as the Mini-V.I.P. isolates the 18 volts to your ignition system only! In the long run, your plugs will run cleaner. Some applications will also be able to run a richer fuel mixture due to the additional spark intensity. The unit is an easy 3-wire install. True to its name, the MINI-V.I.P. only weighs 1 lb.! To insure maximum results, as we did in our tests, we suggest running our Screamin’ Demon Coil and Live Wire Plug Wires with the 18 volt Mini-V.I.P.
* Note: The wires and coil is sold seperatly.
Screamin' Demon Coil
||Open your spark plug gaps to a whopping .060" when you bolt on the Screamin' Demon Coil for your PT Cruiser! |
The longer duration spark it produces burns the fuel mixture more completely. NO drop off in power as you accelerate. Your plugs also stay cleaner longer.
The Screamin' Demon Coil mounts in the original factory location with no modifications.
Live Wires Plug Wires
LiveWiresŪ Are space age, heat resistant sleeving to provide protection from exhaust heat. The sleeving is heat-treated glass braid and is non-flammable and non-corrosive to chemicals. LiveWires unique sleeving provides protection from -76° to +1400° F and offers excellent resistance to moisture and chemicals. LiveWires have a durable and long lasting silicone jacket and insulation. Heat shrink applied between the boot and the sleeving keeps dirt and moisture away from wire terminals. LiveWires spiral wound core prevents electronic interference. No radio noise or computer interference. They offer extremely low resistance of 300 - 350 Ohms per foot for optimum spark travel. Livewires are built right from the beginning, no add-on sleeves - just remove your old wires and replace with Livewires!
Available in Blue, Black, Purple, Red and Yellow. Please specify color when ordering.
"The stock PT wires measured an astounding 3240 ohms of resistance per wire. This is way too much to achieve maximum spark at the plugs. We then designed a set of our Livewires for my Cruiser with only 250 ohms of resistance per wire! That's almost 13 times less resistance than the stock wires. Acceleration is now smoother and spark delivery at the plugs is optimized. As a fellow PT Cruiser owner, I can assure you that you'll enjoy our Livewires spark plug wires"
Live Wires, Non Turbo