| || |
Chrome Hood Trim Decor
Hot Rod or not, this Art Deco inspired hood trim adds timeless style to your PT Cruiser. Hood trim complements the stock emblem, uniting both parts into a unit that looks great! No holes to drill! Easily installed by using template provided. The trim was designed and produced in the USA to OEM standards. Double sided 3M automotive tape is pre-applied to each trim for installation.
Installs in about 10 minutes
Chrome Hood Decore, 2001-2010
Chromed Metal Bumper Cover, 2001-2005
Front no longer available...sorry
This Chrome Bumper Cover represent a true breakthrough in PT Cruiser accessories.
The plain gray plastic stock bumpers present a conflict with the retro styling, and beg for trim or modification to accent the great original styling of the Cruiser. Manufactured by an O.E.M. (Original Equipment Manufacturer) bumper manufacturer, these quality chrome cover are built to the highest standards. Made of high-grade bumper specific steel, it is polished and plated to O.E. specifications. It come with a 3 year limited warranty against defects in workmanship and materials.
Installation is an easy job requiring about 30 minutes. Designed to provide a durable lightweight steel outer skin to the stock bumpers, they slip on easily and are attached using the supplied fasteners in the designated hidden locations. Bumper has the license plate holes ready so there is no drilling at all.
Fits Turbo Models also.
Rear Chrome Bumper Cover
Chromed Antenna Bezel, 01-10
Here is a nice addition to enhance your cruiser look.
This is a sharp looking chromed Antenna Bezel. It fits 2001-2010 cruisers, very easy to install.
Chrome Antenna Bezel
Chrome Billet Grooved #120
Chrome Skull #180
Take the looks of your PT "Back to the Future" with these 18"
high retro "hot rod" look antennas in Chrome finish.
Everyday low price!
Billet, Flamed Shorty Antennas 17"
If you’ve been looking for a car antenna to match you ride’s flamed-out attitude then you will totally dig the “Stubbie Antenna” laser flame radio antenna. The antenna mast of the laser flame “Stubbie Antenna” is machined from a 1 /4’’ stainless steel rod and the base is machined from aluminum billet. Antenna is Laser etched with a flame design onto the antenna mast and then polished it to shine bright like chrome.
This radio antenna isn’t only designed to enhance the appearance of your car, truck or SUV but to also provide the best possible radio reception! All include three adapters to fit most foreign and domestic vehicles
- Machined from 1/4" steel rod.
- Billet aluminum base.
- Laser-etched flame design.
- 3 adapter fittings.
- Improves radio reception.
Price: $39.99 Each
Flamed Antenna 17”
Yellow Flame left
Chrome Door Striker Plates
Replace your old brass looking door striker plate with show quality chrome strikers. This is a five piece set that comes with new chrome screws except for the rear hatch striker screws (you don’t see them). Easy replacement, installs in about 15 minutes. Also for the Convertible Cruiser in a (3) piece set.
Chrome Striker Plates Set (5) With Core Exchange
Chrome Striker Plate set (3), Convertible With Core Exchange
Show & Shine Door Retention Rods
Very cool item for the car show buffs. Keep your show car doors open and secure at shows and meets. These will protect your car from public getting inside by locking in place, props the door open just enough for great viewing. They are made of a light weight metal and Quadra plated chrome for that life long lasting look. You can get the 22" set for the front or the 30" set for the rear doors. Comes in sets of 2.
Set of Two 30"
Chrome Rentention Rods
Cruiser Engine Header Shroud - 3 Piece, 01-10
The 3 piece header plate wraps around the outside of the engine compartment. This is made of polished 304 stainless steel. 2001-2010
Stainless Engine Header Shroud, 2001-2010
PT Cruiser Polished Rear Hatch Strut Cover Kit
01-10, Add the perfect finishing touch to the tailgate of your PT with this inexpensive and high quality kit! These covers install right OVER your existing gas cylinders and look fabulous.
Made of solid stainless steel, and hand-polished to a beautiful bright finish, these are quality pieces. Kit includes two cylinder covers and instructions, Easy installation.
Convertible Stainless Polished Strut Covers
Chromed Front Wiper Arms
Front wiper arms fully chromed no plastic, real metal arms. Never have to worry about peeling, fading or the chrome getting yellow. We use a three phase process to chrome these arms.
Chrome Front Wiper Arm Set, 01-10
Chromed Rear Wiper Arm
Rear wiper arm is fully chromed, no plastic, real metal arm. Never have to worry about peeling, fading or the chrome getting yellow. We use a three phase process to chrome this rear arm.
Chrome Rear Wiper Arm, 01-10
Cruiser License Plate Mounting Bracket, 06-10
Deluxe Molded Splash Guards
Deluxe Molded Splash Gaurds provide excellent lower body protection and accent the vehicle styling. Made of a composite of TPO plastic and TPR rubber to be rigid yet forgivable and paintable. They are molded to the contours of the PT for a custom fit and feature the PT Cruiser logo. Black, rear only.
Molded Mud Flaps Set, 01-10
6-Piece Stainless Pillar Post Trim Set
Set your PT Cruiser apart with this high quality Pillar Post Set from APA! Made with dual textured stainless steel (brushed and polished) and featuring the distinctive "PT Cruiser" logo, this unique accent is sure to please even the most hard-core enthusiast! Note* No PT Cruiser logo on the bottom back pillar.
Very easy to install takes about 15 minutes.
6- Piece Pillar Set, 01-10
Price: $ 46.99
Chrome Tail Light Open Trim Ring
One size fits all!
Dress up your PT with this highly polished stainless steel hood panel or Polished Diamond plate panel. Easy install only three small hole to drill.
Upper Hood Panel, 2001-2010
CMS Chrome Plated Plastic Nut Covers
Now "46" Pieces
Dress up the under-hood area of your PT with these bright, chrome plated plastic nut covers. These versatile decorations can be used to hide unsightly black or rusted nut/stud locations. Each kit contains 2 Extra Large, 18 Large, 14 Medium and 12 Small covers that press-on fit, but can be removed when necessary. Covers fit over the nuts that secure the engine bay area, hood hinges, struts, inside door jambs, etc. Covers also fit the bolt heads and dress up the center post of the driver and passenger door openings. If the nut cover wont fit tight it is reccommended to use silicone gel or other adhesive to secure cover in place.
Set of 46 CMS Nut Covers
PT Cruiser Diamond Plate Floor Mats
Here's an eye catcher at shows...
Fits all years all models!!! "4" Highly polished aluminum Diamond Plate floor mats complete set, Front and Rear Mats protect your carpet with REAL Metal, Manufactured of high quality Aircraft Aluminum Fits the front & rear of your cruiser perfectly. Quality is most important.
Diamond Plate Floor Mat Set, 01-10
Cruiser Door Sill Plates Diamond Plate Front & Rear
This is a brand new product from Cruisermotorsports. Fits all years all models! You will not find the quality nowhere else.
This package includes a 4-pc set of highly polished aluminum Diamond plate door sill plates to replace both front & rear, driver and passenger factory plastic sill plates. The Plates attach with red 3m Auto adhesive tape and everything is included in the kit.
Diamond Plate Door Sill Plates, 01-10
Cruiser 1940's Chrome Fender Kit, 01-10
Now this is Retro! Fits all years and models One of the best products I've seen this year The kit comes prenumbered and sealed for easy install and includes both sides and Installs in about a half an hour. Kit has a lifetime warranty.
Front Fender 1940 Kit
Chrome Wheel Well Lip Molding
Highlight your wheels while accenting your wheel wells. These high quality moldings come ready to install and attach easily using our 3M application system. No holes to drill! For an outstanding look with a lifetime guarantee! Order Today.
Wheel Well Trim Molding, 01-10
Cruiser Chrome Beltline, 01-10
Fits all years all models!!! Including Convertible. Made of High Quality Extruded chrome. FEATURING A LIFETIME WARRANTY Kit is designed for easy DIY installation. All pieces come sealed, & marked for easy installation Full instructions are included. Kit encircles entire vehicle with a chrome strip just above the indented bodyline. Enhances your PT's classy look. Looks Incredible with our grille kit as well! No drilling, attaches with 3M automotive tape. We Use High Quality Professional Grade material.
Chrome Hood Beltline Kit for the PT Cruiser, 01-10
Hood Beltline Package encircles the hood only just above the beltline crease,
mimicking the classic good looks of the '30s and '40s elegant chrome trim.
Using our chrome grill and beltline together results in a conservative yet attention
grabbing appearance that could have come directly from Chrysler's own drawing boards.
Chrome Grill & Body Accent Kit
Chrome grille and beltline-molding kit accents the lines and curves of your PT. The grille accents extend the look of the factory grille while the belt line molding encircles the body in chrome. Includes wheel opening moldings and door spears to complete the look. Moldings are made of automotive grade plastic with a chrome outer shell. Installed with 3M adhesive supplied.
Chrome Complete Grill and Body kit, 2001-2005
Cruiser Chrome Grille Kit
This is a Chrome Grill Kit for 2001- 05. Goes over the existing top of your stock grille. Kit Comes with upper and lower sections. They are a 3-M product and chrome with a clear coat overlay to protect them for longevity. Kit features a LIFETIME WARRANTY!!! We put a professional edge on the grill pieces and comes prenumbered and sealed for easy install. Installs with 3-M redline automotive tape already on pieces. This takes about a half an hour for the do it yourself installer and very easy. Kit Comes with everything needed to install. Enhances your PT's classy look. Looks Incredible with our Beltline kit as well! No drilling, attaches with 3M automotive tape.
Chrome Grill Kit, 01-05
ABS Chromed Mirror Covers
Chromed mirror covers are a great dress up accessory for your PT. Made of rugged, durable ABS for easy installation and great looks, then chrome plated to a high luster! 3-M double-stick adhesive included.
This kit fits ONLY the folding style mirrors 2001-2002 and ONLY fits "Left-hand-drive" PTs.
Chromed Mirror Cap Covers
AutoTechnica Chrome Grill Overlay
01-05. This great looking grill is 2 pieces and fits over your factory grill using 3-M tape.
It really looks sharp and gives that classy look to the front end, very easy to install.
Great Quality and Value.
Upper & Lower grill set
Upper Grill Only
Lower grill only