This kit provides both the pump-spray cleaner and the special dirt trapping Blue Oil, in a convenient color coded pump aerosol form. Easily clean and recharge your blue color Air Force One or Mopar or permanent-type intake filter elements to make them perform like new. See your filter documentation for cleaning service interval suggestions.
Price: $21.00
Blue Filter Re Charge Kit
Airaid Tune-Up Kit, 8oz Squeeze Oil, 12oz Cleaner
· Gently shake off and brush away excess dirt.
· Spray on AirAid Cleaning Solution so that the filter is fully saturated, and
let soak for 10 minutes.
· Rinse filter from the clean side to the dirty side until water comes through clear. Use only low pressure from a tap or hose.
· Allow filter to dry. A fan may be used to speed process.
· DO NOT use heated air blowers, compressed air, or open flame. Make one careful application of AirAid® Performance Oil to each filter pleat.
· Allow oil to seep into filter for 20 minutes.
· Re-oil any areas that still appear dry.
· Do not over oil
Price: $13.99
Airaid Cleaning Kit
|
PT CRUISER "BATTERY BRA
Finally, a really cool accessory for those of us PT CRUISER owners that have removed our factory air-cleaners and opted for a high-performance airbox. This PT CRUISER "BATTERY BRA" COVER is the first of it's kind and will enhance the and beautify the overall look of your PT's engine compartment like never before. Manufactured from hi-impact, heat-resistant Lexan, this PT Cruiser "Battery Bra" is just the thing to complete the clean look of your PT. It is the easiest accessory you will have ever installed in your PT - you will need your original battery sheath that came standard on all PT Cruisers. The PT CRUISER "BATTERY BRA" COVER is also available in a chrome/mirror finish.
 
Price: $19.99
Black Battery Cover
Products for your PT Cruiser that can provide up to 20 more horsepower and improved torque. By simply bolting on a one-inch spacer beneath the throttle body, you will improve drivability, gain confidence from more responsive performance, and increase fuel economy. The Helix Power Tower is designed and tested to provide a better low-end torque gain to better off-idle performance. The threaded bore takes the standard incoming air entering the engine and swirls the air. This swirl action enables the incoming air to navigate and past obstacles in the intake port to better fill the cylinder. The more air entering the cylinder mixed with fuel will better the power output.
 
Machined from heat-treated, aircraft quality, solid aluminum, the Helix Power Tower is strong. There are NO moving parts to wear out, which means this will last a long time. Vehicle warranty should not be affected by installing a Helix Power Tower. It has been tested by the California Air Research Board and assigned an EO #D516-2.
Complete installation instructions and all the necessary hardware for a complete installation is included with the Helix Power Tower. In approximately one hour, you will have a stronger performing vehicle for a very little cost.
Price: $ 94.99
Helix Tower 01-10
K&N Performance Gold® Oil Filters
 |
|
|
- Wrench nut for quick and easy removal
- Meets or exceeds engine filtration requirements
- Heavy duty construction with increased wall thickness for higher burst strength
- Emission legal in all 50 US States.
- Oil flow rate 12-16 gallons per minute (depending on oil filter size)
|
K&N Performance Gold® Oil Filters for automotive and marine applications has been constructed from the ground up to satisfy the high performance needs of race car owners and drivers, as well as the average vehicle or boat owner who wants the very best oil filter available. Our oil filter's efficiency rating meets or exceeds the requirements of high performance automotive engine builders. The heavy duty construction provides over 550 PSI hydrostatic burst.
The real quality isn't just on the outside... the inner filter element traps contaminant as small as 10 to 20 microns in size. We use metal top end caps instead of paper to ensure that no unfiltered oil can get back into the system. The solid construction allows for oil flow rates between 12-16 gpm (depending on filter size), and is unaffected by racing fuels. All K&N Performance Gold® Oil Filters are manufactured to exacting engineering standards.
Price: $10.99
Oil Filters
2001-2010
